IVR Options for Analog Telephone Adapters
NotesIVR CodeAction
Answer with 0, the default option
(DHCP).
100Check internet addressing method
Available in static IP mode only.111Configure IP address
To disable VLAN, set VLAN ID to
4095.
To enable VLAN, set VLAN ID
from 1 to 4095.
231Configure VLAN
Available in static IP mode only.131Configure default gateway
Available in static IP mode only.121Configure subnet mask
73738Factory reset
Erases all user data except network
setting and log files.
73739Reset service mode
DCHP: 0
Static: 1
101Set internet addressing method
110Show IP address
230Show VLAN
130Show default gateway
120Show subnet mask
Lost Phone Connectivity
Sometimes your phone loses its connection to the phone network. When this connection is lost, your phone
displays a message.
If you are on an active call when the connection is lost, the call continues. But, you don't have access to all
normal phone features because some functions require information from the call control system. For example,
your softkeys might not work as you expect.
When the phone reconnects to the call control system, you'll be able to use your phone normally again.
Make a Conference Call from Your Analog Phone
You can talk with several people in a single call.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
181
Additional Information
IVR Options for Analog Telephone Adapters
To Next Page
Loading...
Need help?
General
