• Feature and line buttons, located on either side of the screen, give you access to phone features and phone
lines.
• Feature buttons—Used for features such as Speed dial or Call pickup, and to view your status on
another line.
• Line buttons—Used to answer a call or resume a held call. When not used for an active call, used
to initiate phone functions, such as the missed calls display.
Feature and line buttons illuminate to indicate status.
• Green, steady LED—Active call or two-way intercom call
• Green, flashing LED—Held call
• Amber, steady LED—Privacy in use, one-way intercom call, or logged into a Hunt Group
• Amber, flashing LED—Incoming call or reverting call
• Red, steady LED—Remote line in use (shared line or Line Status) or Do Not Disturb (DND) active
• Red, flashing LED—Remote line on hold
Your administrator can set up some functions as softkeys or as feature buttons. You can also access some
functions with softkeys or the associated hard button.
Phone Screen Features
The phone screen shows information about your phone such as directory number, active call and line status,
softkeys, speed dials, placed calls, and phone menu listings. The screen is made up of three sections: the
header row, the middle section, and the footer row.
Figure 12: Cisco IP Phone 7800 Screen
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
108
Phone Navigation, Softkeys, Buttons, and Screen
Phone Screen Features
To Next Page
Loading...
Need help?
General
