Procedure
Step 1 Press Applications .
Step 2 Select Settings > Video > Bandwidth.
Step 3 Select a bandwidth setting.
Step 4 Press Save to set the bandwidth.
View Video Calls on Your Computer
You can view the video part of a call on your computer instead of the phone screen. The audio part of the call
remains on your phone.
You cannot use desk phone video capabilities on a phone if a video camera is attached, such as a Cisco IP
Phone 8845 or 8865.
Before you begin
Connect the computer to the PC port of your phone with an Ethernet cable, and login to Cisco Jabber for
Windows or Cisco Jabber for Mac. The phone must be connected to the first network interface card (NIC1)
in the computer.
The phone PC port is disabled when Wi-Fi is enabled on your phone.
You need the latest version of Cisco Media Services Interface (MSI) and one of the following products:
• Cisco Jabber for Windows 9.7(5) or later
• Cisco Jabber for Mac 10.8.1 or later
Contact your administrator if you do not have the latest version of Cisco Jabber or MSI. For a list of hardware
and software requirements, see:
• Cisco Jabber for Windows release notes at http://www.cisco.com/c/en/us/support/unified-communications/
jabber-windows/products-release-notes-list.html.
• Cisco Jabber for Mac release notes at http://www.cisco.com/c/en/us/support/unified-communications/
jabber-mac/products-release-notes-list.html
Procedure
Step 1 Press Applications .
Step 2 Select Settings > Video.
Step 3 Select Video through computer.
Step 4 Select On to enable the video.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
40
Change the Video Settings on Your Cisco IP Phone 8845, 8865, and 8865NR
View Video Calls on Your Computer
To Next Page
Loading...
Need help?
General
