Procedure
Step 1 Search for a contact and select it.
Step 2 Press to save the contact as a favorite.
Edit a Contact Phone Number's Digits
You can search for a contact that's in your corporate directory. If the contact has a phone number but no
address information, you may need to edit the phone number before you call. For example, you may need to
add a digit to reach an outside line, or to replace an external phone number with an internal dial code.
If the contact has both address information and a phone number, only the address is shown and you can't edit
it.
Before you begin
Search for a contact in your corporate directory.
Procedure
Step 1 Press Edit dial (8800 Series) or EditDial (7800 Series).
Step 2 Move the cursor to the digits that you want to edit:
• 8800 Series: Press left or right on the navigation ring.
• 7800 Series: Press >> or <<.
Step 3 Edit the number. Use the X softkey to delete digits.
Step 4 Press Call to call the edited number.
The edited number is saved in your Recents list. You can save the edited number as a Favorite. If you search
for the same contact again, you see the original number, not your edited version.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
125
Search and Call Contacts on Your Phone
Edit a Contact Phone Number's Digits
To Next Page
Loading...
Need help?
General
