Cisco IP Phone 7800 Series - CHAPTER 39 Use Barge and Privacy on Shared Lines; Add Yourself to a Call on a Shared Line; Enable Privacy on a Shared Line

Procedure
Step 1 From Cisco Webex Settings, select Call Settings.
Step 2 Under Speed Dial Numbers, select Reorder.
Step 3 Drag and drop your speed dials to place them in the desired order.
Step 4 Select Save.
Make a Call with a Speed-Dial Button on Your Desk Phone
Each phone model has a specific number of line buttons available for phone features such as speed-dial
numbers. But line buttons are often used for features other than speed-dial numbers. If you add more speed-dial
numbers than available lines, the remaining speed-dial numbers don't display on your phone.
On the Cisco IP Phone 8800 Series, you see only the speed-dial numbers that are added to the available lines.
On the Cisco IP Phone 7800 Series, you can use the navigation cluster to view all your speed-dial numbers.
Use the up and down buttons in the cluster to scroll through your speed-dial numbers, then select a speed-dial
number. This includes any speed-dial numbers that do not display on the phone.
Before you begin
Set up speed-dial codes in Cisco Webex Settings.
Procedure
Press a speed-dial button.
Make a Speed-Dial Call with Your Conference Phone
Before you begin
Set up speed-dial codes in Cisco Webex Settings.
Procedure
Step 1 Press down on the Navigation bar or press Favorites.
Step 2 Select a speed-dial entry and press Call.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
133
Speed-Dial Buttons on Your Phone
Make a Call with a Speed-Dial Button on Your Desk Phone