Supported ATA Call Features
Depending on your system configuration, your ATA supports some or all the following call features:
• Transfer (attended or supervised)—In this type of transfer, you talk to the receiving party before you
complete the transfer.
See Transfer a Call from Your Analog Phone, on page 194 for details.
• Transfer (unattended or unsupervised)—In this type of transfer, you complete the transfer and hang up
before the receiving party answers.
See Transfer a Call from Your Analog Phone, on page 194 for details.
• Conference.
See Make a Conference Call from Your Analog Phone, on page 181 for details.
• Hold and Resume.
See Put a Call on Hold on Your Analog Phone, on page 187 for details.
• Caller ID.
• Call Waiting.
See Answer Call Waiting on Your Analog Phone, on page 29 for details.
• Call Pickup.
• Speed Dial.
• Music On Hold.
• Shared Lines.
• Voicemail—This feature has no visual indicator, but a message waiting tone when you go off-hook
indicates that you have voice messages. Some analog phones with a large LCD screen may display a
voicemail icon.
See Voicemail on Your Analog Phone, on page 153 for details.
• Call Forward.
See Call Features and Star Codes for Analog Phones, on page 171 for details.
• Redial.
See Call Features and Star Codes for Analog Phones, on page 171 for details.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
53
Getting Started with Your New ATA
Supported ATA Call Features
To Next Page
Loading...
