Cisco IP Phone 7800 Series User Manual

CHAPTER 8
Answer Calls on Your Desk Phone
• Answer a Call, on page 33
• Answer Call Waiting, on page 33
• Answer Calls Automatically, on page 33
Answer a Call
Procedure
When your phone rings, press the flashing line button to answer the call.
Answer Call Waiting
When you are on an active call, you know that a call is waiting when you hear a single beep and see the line
button flash.
The Cisco IP Phone 7811 doesn't support call waiting.
Procedure
Step 1 Press the line button.
Step 2 (Optional) If you have more than one call waiting, select an incoming call.
Answer Calls Automatically
If your phone is set up to answer calls automatically, you don't do anything when your phone rings. After one
ring, you're automatically connected to the call using the speakerphone.
If you prefer to use your headset to answer the call, set up your headset first.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
33

Cisco IP Phone 7800 Series Specifications

General

Protocols	SIP, SCCP
Bluetooth	No
Wi-Fi	No
Connectivity	Ethernet
PoE	IEEE 802.3af/at
Speakerphone	Full-duplex
Headset Support	Yes, via headset port
Ethernet Ports	Dual 10/100/1000 Ethernet ports
Codec Support	G.711, G.722, G.729, iLBC
Security	TLS, SRTP, 802.1X
USB Port	Yes
Mounting	Desk or wall
Audio	Wideband audio (G.722), Handset and speakerphone