Cisco IP Phone 7800 Series - Mobility-Impaired Accessibility Features for the Cisco IP Conference Phone 7832

Procedure
Step 1 While on an active call, perform a hook flash.
This puts the call on hold and you hear dial tone.
Step 2 Dial a second number and wait until that person answers.
Step 3 To create the conference, perform a hook flash.
You are now in a conference with both persons.
Mobility-Impaired Accessibility Features for the Cisco IP
Conference Phone 7832
Your conference phone comes with standard accessibility features that require little or no setup.
Figure 20: Mobility-Impaired Accessibility Features
The following table describes the mobility-impaired accessibility features on the Cisco IP Conference Phone
7832.
Table 13: Mobility-Impaired Accessibility Features
DescriptionAccessibility FeatureItem
Indicates your phone's status:
• Green, solid—Active call
• Green, flashing—Incoming call
• Green, pulsing—Held call
• Red, solid—Muted call
LED bar1
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
182
Additional Information
Mobility-Impaired Accessibility Features for the Cisco IP Conference Phone 7832