Cisco IP Phone 7800 Series - Wall Mount Components

NotesCisco Wall Mount KitCisco IP Phone
This wall mount kit is available for
Cisco IP Phone 8845 and 8865 only.
It can be locked, but it cannot be used
with a key expansion module.
Spare Wallmount Kit for Cisco IP Phone 8800 Video
Series
Cisco IP Phone 8845, and 8865
Wall Mount Components
You can attach a wall mount kit to most surfaces, including concrete, brick, or other hard surfaces. But the
items in your wall mount kit are for drywall use only. If you mount your phone on other surfaces, obtain the
appropriate screws and anchors.
Check and see that you have the correct components before you install your kit. For each phone model, use
the table and diagram to check the contents of your wall mount kit.
Spare Wall Mount Kit for Cisco IP Phone 7811
ComponentItem
4 M4 x 25-mm Phillips-head screwsA
4 anchorsB
2 M3 x 7-mm self-tapping screwsC
1 wall bracketD
1 phone bracketE
One 200-mm Ethernet cableF
Figure 6: Components of Spare Wall Mount Kit for Cisco IP Phone 7811
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
82
Mount Your Phone to a Wall
Wall Mount Components