Cisco IP Phone 7800 Series - CHAPTER 23 Mount Your Phone to a Wall; Wall Mount Kits

CHAPTER 23
Mount Your Phone to a Wall
In areas with no desks, such as kitchens or conference rooms, you can use a wall mount kit to mount a phone
to a wall. Check that you have the right wall mount kit for each phone model.
• Wall Mount Kits, on page 81
• Wall Mount Components, on page 82
• Install a Spare Wall Mount Kit, on page 86
• Remove the Phone from the Wall Mount Kit, on page 93
• Adjust the Handset Rest on Your Phone, on page 94
Wall Mount Kits
Each wall mount is unique to your phone model and cannot be used for another phone. If you are planning
to attach your phone to a wall, purchase the wall mount kit specific to your phone.
For part numbers and other additional information, refer to the phone model data sheet. The Cisco IP Phone
8800 Series data sheets can be found here https://www.cisco.com/c/en/us/products/collaboration-endpoints/
unified-ip-phone-8800-series/datasheet-listing.html. The Cisco IP Phone 7800 Series data sheets can be found
here https://www.cisco.com/c/en/us/products/collaboration-endpoints/unified-ip-phone-7800-series/
datasheet-listing.html.
To check which phone model you have, press Applications and select Phone information. The Model
number field shows your phone model.
Table 6: Wall Mount Kits
NotesCisco Wall Mount KitCisco IP Phone
Spare Wallmount Kit for Cisco IP Phone 7811Cisco IP Phone 7811
Spare Wallmount Kit for Cisco IP Phone 7800 SeriesCisco IP Phone 7821 and 7841
Spare Wallmount Kit for Cisco IP Phone 7861Cisco IP Phone 7861
Spare Wallmount Kit for Cisco IP Phone 8800 SeriesCisco IP Phone 8811 and 8841
This wall mount kit cannot be used
with a key expansion module.
Spare Wallmount Kit for Cisco IP Phone 8800 SeriesCisco IP Phone 8851, 8851NR, and
8861
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
81