Cisco IP Phone 7800 Series - Call Features and Star Codes for Analog Phones; Change the Label of Your Primary Line

If the person does not have a voicemail account, you reach their phone, not their voicemail.
Call Features and Star Codes for Analog Phones
You can use star codes to enable and disable call features. The following table describes the phone features
available and the corresponding star codes.
Table 12: Call Features and Star Codes
Turn OffTurn OnDescriptionFeature
**6Barge into a call on a shared line.Barge
#73#72Forward your calls to another number.
See Forward Your Analog Phone Calls to Another
Number, on page 177 for details.
Call forward
#90Transfer a call to another number without waiting
for the other number to answer.
See Transfer a Call from Your Analog Phone, on
page 194 for details.
Blind transfer
*#Redial the previous number you called.
See Redial a Number from Your Analog Phone,
on page 65 for details.
Redial a
number
*0Access your voice-messaging system.
See Check Your Voicemail from Your Analog
Phone, on page 153 for details.
Voice-messaging
system
Change the Label of Your Primary Line
You can change the line label of your primary line from the default value, which is [Extension] - [User]. To
change the line labels of your other lines, ask your administrator.
Procedure
Step 1 From Cisco Webex Settings, click Call Settings.
Step 2 Click the pencil icon next to the line label for your primary line.
Step 3 Enter a new line label, and click Save.
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
171
Additional Information
Call Features and Star Codes for Analog Phones