Cisco IP Phone 7800 Series - Page 179

Figure 19: Cisco IP Phone 8845 Buttons and Hardware
The following table describes the Cisco IP Phone 8800 Series Buttons.
Table 11: Cisco IP Phone 8800 Series Buttons
Indicates whether you have an incoming call (flashing red) or a
new voice message (steady red).
Handset and Handset light strip1
Use the camera for video calls.Camera
Cisco IP Phone 8845, 8865, and
8865NR only
2
Access your phone lines, features, and call sessions.
When adding features to the phone line keys, you are limited by
the number of line keys available. You cannot add more features
than the number of line keys on your phone.
Programmable feature buttons
and line buttons
3
Access to functions and services.
Softkey buttons4
Back Return to the previous screen or menu.
Navigation cluster Navigation ring and Selectbutton—Scroll
through menus, highlight items and select the highlighted item.
Release End a connected call or session.
Back, Navigation cluster, and
Release
5
Hold/Resume Place an active call on hold and resume the
held call.
Conference Create a conference call.
Transfer Transfer a call.
Hold/Resume, Conference,
and Transfer
6
Cisco IP Phone 7800 and 8800 Series, Cisco IP Conference Phone 7832, and Cisco ATA 190-SC User Guide for Webex Calling (formerly Spark
Call)
165
Your Cisco IP Phone 8800 Series
Cisco IP Phone 8800 Series Buttons and Hardware