Cisco Mesh Access Points User Manual

Check Packet Error Rate 220
Bridge Group Name Misconfiguration 220
Misconfiguration of the Mesh Access Point IP Address 222
Misconfiguration of DHCP 223
Identifying the Node Exclusion Algorithm 223
Throughput Analysis 225
CHAPTER 8 Managing Mesh Access Points with Cisco Prime Infrastructure 227
Adding Campus Maps, Outdoor Areas, and Buildings with Cisco Prime Infrastructure 227
Adding Campus Maps 228
Adding Outdoor Areas 228
Adding a Building to a Campus Map 229
Adding Mesh Access Points to Maps with Cisco Prime Infrastructure 230
Monitoring Mesh Access Points Using Google Earth 232
Launching Google Earth in Cisco Prime Infrastructure 232
Viewing Google Earth Maps 233
Adding Indoor Mesh Access Points to Cisco Prime Infrastructure 236
Managing Mesh Access Points with Cisco Prime Infrastructure 237
Monitoring Mesh Networks Using Maps 237
Monitoring Mesh Link Statistics Using Maps 237
Monitoring Mesh Access Points Using Maps 238
Monitoring Mesh Access Point Neighbors Using Maps 239
Monitoring Mesh Health 240
Viewing Mesh Statistics for a Mesh Access Point 242
Viewing the Mesh Network Hierarchy 247
Using Mesh Filters to Modify Map Display of Maps and Mesh Links 248
Monitoring Workgroup Bridges 250
Multiple VLAN and QoS Support for WGB Wired Clients 251
Workgroup Bridge Guidelines 252
Configuring VLAN and QoS Support (CLI) 252
Workgroup Bridge Output 253
WGB Detail on Controller 255
Troubleshooting Tips 256
Viewing AP Last Reboot Reason 257
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
x OL-27593-01
Contents

Cisco Mesh Access Points Specifications

General

Brand	Cisco
Model	Mesh Access Points
Category	Wireless Access Point
Language	English