Cisco Mesh Access Points User Manual

Configuring a Locally Significant Certificate (CLI)
To configure a locally significant certificate (LSC), follow these steps:
Step 1
Enable LSC and provision the LSC CA certificate in the controller.
Step 2
Enter the following command:
config local-auth eap-profile cert-issuer vendor prfMaP1500LlEAuth93
Step 3
Turn on the feature by entering the following command:
config mesh lsc {enable | disable}
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 187
Connecting the Cisco 1500 Series Mesh Access Points to the Network
Locally Significant Certificates for Mesh APs

Cisco Mesh Access Points Specifications

General

Brand	Cisco
Model	Mesh Access Points
Category	Wireless Access Point
Language	English