Cisco Mesh Access Points - AP Console Access

CHAPTER 6
Checking the Health of the Network
This chapter describes how to check the health of a mesh network and contains the following sections:
• Show Mesh Commands, page 193
• Viewing Mesh Statistics for a Mesh Access Point, page 199
• Viewing Neighbor Statistics for a Mesh Access Point, page 203
Show Mesh Commands
The show mesh commands are grouped under the following sections:
• Viewing General Mesh Network Details
• Viewing Mesh Access Point Details
• Viewing Public Safety Setting
• Viewing Security Settings and Statistics
To view a summary of possible show mesh commands, enter this command:
(Cisco Controller) > show mesh ?
env Show mesh environment.
backhaul Show mesh AP backhaul info.
neigh Show AP neigh list.
path Show AP path.
astools show mesh astools list
stats Show AP stats.
secbh-stats Show Mesh AP secondary backhaul stats.
per-stats Show AP Neighbor Packet Error Rate stats.
queue-stats Show AP local queue stats.
security-stats Show AP security stats.
ap Show mesh ap summary
config Show mesh configurations.
secondary-backhaul Show mesh secondary-backhaul
ids-state Show mesh ids-state
client-access Show mesh backhaul with client access.
public-safety Show mesh public safety.
background-scanning Show mesh background-scanning state.
cac Show mesh cac.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 193