EasyManua.ls Logo

Cisco Mesh Access Points - Debug Commands

Cisco Mesh Access Points
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Deployment Guidelines
When using local authorization, the controller should be installed with the vendor's CA and device
certificate.
When using an external AAA server, the controller should be installed with the vendors CA and device
certificate.
Mesh security should be configured to use ‘vendor as the cert-issuer.
MAPs cannot move from an LSC to an MIC when they fall back to a backup controller.
The config mesh lsc {enable | disable} command is required to enable or disable an LSC for mesh APs.
This command causes all the mesh APs to reboot.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
192 OL-27593-01
Connecting the Cisco 1500 Series Mesh Access Points to the Network
Locally Significant Certificates for Mesh APs

Table of Contents

Related product manuals