Cisco Mesh Access Points - WGB Detail on Controller

WGB Detail on Controller
To display WGB details about the controller, enter the following command:
(Cisco Controller) > show wgb summary
Number of WGBs................................... 2
ClientsProtocolAuthWLANStatusAP NameIP AddressMAC Address
2802.11aYes2Assocc1240209.165.200.22500:1d:70:97:bd:e8
5802.11aYes2Assocc1240209.165.200.22600:1e:be:27:5f:e2
Cisco Controller) > show client summary
Number of Clients................................ 7
WiredPortProtocolAuthWLAN/Guest-LanStatusAP NameMAC Address
No29N/AYes1AssociatedR1400:00:24:ca:a9:b4
No29802.11aYes1AssociatedR1400:24:c4:a0:61:3a
No29802.11aYes1AssociatedR1400:24:c4:a0:61:f4
No29802.11aYes1AssociatedR1400:24:c4:a0:61:f8
No29802.11aYes1AssociatedR1400:24:c4:a0:62:0a
No29802.11aYes1AssociatedR1400:24:c4:a0:62:42
No29802.11aYes1AssociatedR1400:24:c4:a0:71:d2
(Cisco Controller) > show wgb detail 00:1e:be:27:5f:e2
Number of wired client(s): 5
AuthWLANMobilityAP NameIP AddressMAC Address
No2Localc1240Unknown00:16:c7:5d:b4:8f
Yes2Localc1240209.165.200.23200:21:91:f8:e9:ae
Yes2Localc1240209.165.200.23400:21:55:04:07:b5
Yes2Localc1240209.165.200.23600:1e:58:31:c7:4a
No2Localc1240Unknown00:23:04:9a:0b:12
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 255
Managing Mesh Access Points with Cisco Prime Infrastructure
Multiple VLAN and QoS Support for WGB Wired Clients