Cisco Mesh Access Points User Manual

•
show ap channel MAP1SB
Information similar to the following appears:
802.11b/g Current Channel ................. 11
Slot Id ................................... 0
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11
802.11a(5.8Ghz) Current Channel ........... 161
Slot Id ................................... 1
Allowed Channel List....................... 149,153,157,161,165
802.11a(5.8Ghz) Current Channel ........... 153
Slot Id ................................... 2
Allowed Channel List....................... 149,153,157,161,165
Configuring Antenna Gain
You must configure the antenna gain for the mesh access point to match that of the antenna installed using
the controller GUI or controller CLI.
Configuring Antenna Gain (GUI)
To configure antenna parameters using the controller GUI, follow these steps:
Step 1
Choose Wireless > Access Points > Radio > 802.11a/n to open the 802.11a/n Radios page.
Step 2
For the mesh access point antenna you want to configure, hover the mouse over the blue arrow (far right) to display
antenna options. Choose Configure.
Only external antennas have configurable gain
settings.
Note
Step 3
In the Antenna Parameters section, enter the antenna gain.
The gain is entered in 0.5 dBm units. For example, 2.5 dBm = 5.
The entered gain value must match that value specified by the vendor for that antenna.Note
Step 4
Click Apply and then Save Configuration to save the changes.
Configuring Antenna Gain (CLI)
Enter this command to configure the antenna gain for the 802.11a backhaul radio using the controller CLI:
config 802.11a antenna extAntGain antenna_gain AP_name
where gain is entered in 0.5-dBm units (for example, 2.5 dBm =5).
Backhaul Channel Deselection on Serial Backhaul Access Point
This feature is applicable to mesh APs with two 5-GHz radios, such as 1524SB (serial backhaul).
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
OL-27593-01 141
Connecting the Cisco 1500 Series Mesh Access Points to the Network
Configuring Antenna Gain

Cisco Mesh Access Points Specifications

General

Brand	Cisco
Model	Mesh Access Points
Category	Wireless Access Point
Language	English