Cisco Mesh Access Points User Manual

Choose Wireless > All APs > AP Name > Neighbor info .
Figure 87: Neighbor Information for a Child
Figure 88: Neighbor Information for a Parent
Misconfiguration of the Mesh Access Point IP Address
Although most Layer 3 networks are deployed using DHCP IP address management, some network
administrators might prefer the manual IP address management and allocating IP addresses statically to each
mesh node. Manual mesh access point IP address management can be a nightmare for large networks, but it
might make sense in small to medium size networks (such as 10 to 100 mesh nodes) because the number of
mesh nodes are relatively small compared to client hosts.
Statically configuring the IP address on a mesh node has the possibility of putting a MAP on a wrong network,
such as a subnet or VLAN. This mistake could prevent a mesh access point from successfully resolving the
IP gateway and failing to discover a WLAN controller. In such a scenario, the mesh access point falls back
to its DHCP mechanism and automatically attempts to find a DHCP server and obtains an IP address from it.
This fallback mechanism prevents a mesh node from being potentially stranded from a wrongly configured
static IP address and allows it to obtain a correct address from a DHCP server on the network.
When you are manually allocating IP addresses, we recommend that you make IP addressing changes from
the furthest mesh access point child first and then work your way back to the RAP. This recommendation also
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
222 OL-27593-01
Troubleshooting
Misconfiguration of the Mesh Access Point IP Address

Cisco Mesh Access Points Specifications

General

Brand	Cisco
Model	Mesh Access Points
Category	Wireless Access Point
Language	English