To view the status of a WGB client, follow these steps:
Step 1
Choose Monitor > Clients.
Step 2
On the client summary page, click on the MAC address of the client or search for the client using its MAC address.
Step 3
In the page that appears, note that the client type is identified as a WGB (far right).
Figure 67: Clients are Identified as a WGB
Step 4
Click on the MAC address of the client to view configuration details:
• For a wireless client, the page seen in Figure 68: Monitor > Clients > Detail Page (Wireless WGB
Client), on page 161 appears.
Cisco Mesh Access Points, Design and Deployment Guide, Release 7.3
160 OL-27593-01
Connecting the Cisco 1500 Series Mesh Access Points to the Network
Workgroup Bridge Interoperability with Mesh Infrastructure
To Next Page
Loading...
