Configuring IPSec with a Windows 2000 or XP Computer
How to Establish a Secure IPSec Tunnel
Cisco RVS4000 Security Router with VPN Administrator Guide 149
C
i. The Filters Properties window will appear. Select the Addressing tab. In the
Source address field, select A specific IP Subnet, and enter the IP Address
192.168.1.0 and Subnet mask 255.255.255.0. (Enter your new values if you
have changed the default settings.) In the Destination address field, select My
IP Address.
Filters Properties
j. If you want to enter a description for your filter, click the Description tab and
enter the description there.
k. Click OK or Close.
To Next Page
Loading...
