Name: Cisco RVS4000 - Gigabit Security Router
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setting Up and Configuring the Router

Setup

Cisco RVS4000 Security Router with VPN Administrator Guide 37

DDNS Service DDNS Service is disabled by default. To enable DDNS Service,

follow these instructions:

Connect The Connect button is displayed when DDNS is enabled. You can click

this button to contact the DDNS server to manually update your IP address

information. The Status area on this window is also updated.

STEP 1 Sign up for DDNS Service:

• DynDNS - Sign up for DDNS service at www.dyndns.org and write down

your User Name, Password, and Host Name information.

• TZO - Sign up for DDNS service at www.tzo.com and write down your email

address, password and domain name information.

STEP 2 Select your DDNS service provider.

STEP 3 Configure these fields:

• User Name (DynDNS) or Email address (TZO).

• Password

• Host Name (DynDNS) or Domain name (TZO)

• Custom DNS (DynDNS)

STEP 4 Click Save.

The router advises the DDNS Service of your current WAN (Internet) IP address

whenever this address changes. If you use TZO, you should NOT use the TZO

software to perform this “IP address update”.

Other manuals for Cisco RVS4000 - Gigabit Security Router

Questions and Answers:

Need help?

Do you have a question about the Cisco RVS4000 - Gigabit Security Router and is the answer not in the manual?

General