EasyManuals Logo

Cisco Unified 8961 User Manual

Cisco Unified 8961
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Conference in one participant. A chaperone can conference the first participant only; subsequent
participants can be added to the conference only by the other participants in the conference.
End the call.
Record Chaperoned Call
Procedure
Step 1
Answer an incoming call.
The Record button displays if the system determines that the call must be chaperoned and recorded.
Step 2
Press Conference to create a conference call.
Step 3
Enter the phone number for the party you want to add and press Call.
Step 4
When the called party answers, press Conference.
The conference begins.
Step 5
Press Record to begin recording the conference call.
Alternatively, you can begin recording the call before the conference call is established. In this case, press
Conference after answering the incoming call. The call gets put on hold automatically, and the recording
stops while you set up the conference call. The recording restarts automatically when the conference call is
established.
Step 6
Press End Call to end the chaperoned call; all parties are disconnected.
Call Forward
Call Forward allows you to forward calls from any line on your phone to another number.
There are two types of call-forwarding features that your system administrator may set up on your phone:
Unconditional call forwarding (Call Forward All): Applies to all calls that you receive. You can set up
Call Forward All directly on your phone for any line. To set up Call Forward All remotely, go to your
User Options web pages.
Conditional call forwarding (Call Forward No Answer, Call Forward Busy, Call Forward No Coverage):
Applies to certain calls that you receive, according to conditions, and is set up from your User Options
web pages.
When forwarding calls from your phone:
Enter the call forward target number exactly as you would dial it from your phone. For example, enter
an access code or the area code, if necessary.
Call forward is phone-line specific. If a call reaches you on a line where call forwarding is not enabled,
the call rings as usual.
Your system administrator can set up other call-forward options:
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
81
Calling Features
Record Chaperoned Call

Table of Contents

Other manuals for Cisco Unified 8961

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco Unified 8961 and is the answer not in the manual?

Cisco Unified 8961 Specifications

General IconGeneral
BrandCisco
ModelUnified 8961
CategoryIP Phone
LanguageEnglish

Related product manuals