Cisco Unified 8961 User Manual

◦
Allow calls placed from the call forward target number to your phone to ring through, rather than
be forwarded.
◦
Prevent you from creating a call-forward loop or exceeding the maximum number of links in a
call forwarding chain.
Forward All Calls
Procedure
Step 1
On any idle line from which you want to forward your calls, press Forward All.
Step 2
Enter a phone number, or select an entry from the Call History list.
Depending on how your voicemail system is set up, you may be able to press Messages to forward all calls
to voicemail.
Visual confirmation displays for a few seconds to confirm the number to which your calls will be forwarded.
Step 3
To verify that your calls are forwarded, look for:
•
A Forward All icon in the line label.
•
The forwarding information in the header.
Step 4
To cancel call forwarding, press Forward Off.
Call Park
Call Park allows you to use your phone to park (temporarily store) a call, which you can then retrieve from
another phone (such as a phone at a coworker’s desk or in a conference room).
There are two ways you can park a call:
Park
Allows you to park an active call that you answered on your phone, and retrieve it using another phone
in the Cisco Unified Communications Manager system.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
82
Calling Features
Forward All Calls

Cisco Unified 8961 Specifications

General

Brand	Cisco
Model	Unified 8961
Category	IP Phone
Language	English