Access Preview Video
Procedure
Step 1
Press More.
Step 2
Press Preview Video.
Enable Video
The Enable Video On/Off settings in the phone menu controls the ability to control the video capability of
the phone. If you enabl video, you identify the phone as being capable of sending and receiving video. If you
disable video, your calls use only audio. Your system administrator controls the ability to use video for calls.
Follow these steps to turn this feature on or off:
Procedure
Step 1
Press Applications.
Step 2
Use the navigation pad and Select button to select Preferences.
Step 3
Select Video.
Step 4
Press On/Off softkey or Select button to toggle video on or off.
Auto Transmit
When Auto Transmit Video is on, the camera streams video automatically during calls.
When Auto Transmit is off, video for each call is automatically muted (however, your phone still receives
video).
Enable Auto Transmit
Procedure
Step 1
Press Applications .
Step 2
Select Accessories.
Use the Navigation pad and Select button to scroll and select.
Step 3
Highlight Cisco Unified Video Camera.
Step 4
Press Setup.
Step 5
Press Turn On to enable the Auto Transmit feature, or press the Return softkey to return to the Setup
screen.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
142
Accessories
Camera Preferences
To Next Page
Loading...
Need help?
General