Cisco Unified 8961 User Manual

Step 4
To enable wideband for the analog headset, press Turn On.
Step 5
To disable wideband for the analog headset, press Turn Off.
Step 6
Press Return to return to the Accessories screen.
Add Bluetooth Accessory
Before you add a Bluetooth accessory, it must be discoverable by the phone. Look for a flashing LED on a
Bluetooth accessory as an indication that it is discoverable. For more information, see the documentation from
the Bluetooth accessory manufacturer.
(For Cisco Unified IP Phone 9951 and 9971 only.)
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
Step 3
Select Add Bluetooth Accessory.
The phone searches for discoverable accessories that are supported. When an accessory is found, it is added
to the list in the Adding Bluetooth Accessory screen.
Step 4
Select the accessory and press Connect.
The phone automatically attempts to connect the accessory using a Bluetooth device PIN of “0000”.
Step 5
If your accessory requires a different PIN and the Adding PIN screen appears, enter the PIN for your accessory.
When the connection completes, the Bluetooth active icon appears on the phone screen header and a
checkmark appears next to the connected accessory.
Delete Bluetooth Accessory
(For Cisco Unified IP Phone 9951 and 9971 only.)
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select Accessories.
Step 3
Select a Bluetooth accessory and press Delete.
The Bluetooth accessory disconnects (if it was connected) and does not display on the Accessories list.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
52
Applications
Add Bluetooth Accessory

Cisco Unified 8961 Specifications

General

Brand	Cisco
Model	Unified 8961
Category	IP Phone
Language	English