Cisco Unified IP PhoneTypeAccessory
997199518961
XXXAnalogHeadset
XXXAnalog Wideband
XX
—
Bluetooth
XXXUSB
XX
—
External PCMicrophone
XX
—
External PCSpeakers
USB Devices
Each USB port supports a maximum of five supported and nonsupported devices that are connected to the
phone. Each device connected to the phone is included in the maximum device count.
For example, your phone can support five USB devices (such as three Cisco Unified IP Color Key Expansion
modules, one hub, and one other standard USB device) on the side port and five additional standard USB
devices on the back port. Many third-party USB products contain more than one USB device, and thus count
as more than one device. For example, a third-party USB device may contain an internal hub and a headset,
and thus count as two USB devices.
If you use a USB hub and remove the USB cable from the phone or device port during an active call, it may
cause your phone or device to reboot. For more information, contact your system administrator.
Cisco Unified IP Color Key Expansion Module
The Cisco Unified IP Color Key Expansion Module attaches to your Cisco Unified IP Phone 8961, 9951, and
9971 and allows you to add up to 36 extra line appearances or programmable buttons to your phone. The
programmable buttons can be set up as phone line buttons, speed-dial buttons, or phone feature buttons.
You can add multiple Expansion Modules to the Cisco Unified IP Phone 9951 and Cisco Unified IP Phone
9971.
Number of Expansion Modules supportedCisco Unified IP Phone model
1 Expansion Module with 36 lines or buttons8961
2 Expansion Modules with 72 lines or buttons9951
3 Expansion Modules with 108 lines or buttons9971
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
134
Accessories
USB Devices
To Next Page
Loading...
Need help?
General