Speed Dial
Speed Dial allows you to press a button and enter a preset code to place a call. Before you can use Speed Dial
features on your phone, you must set up speed-dial on your User Options web pages.
Depending on setup, your phone can support these Speed Dial features:
•
Speed-dial buttons: Allow you to quickly dial a phone number from one or more line buttons set up for
speed dialing.
If your system administrator has set up the Line Status feature, you can monitor the status of a speed-dial
line by using the line status indicators.
•
Speed-dial codes: Allow you to dial a phone number from a code (sometimes referred to as abbreviated
dialing).
You can use also use Speed Dial to reach telephone numbers that require a Forced Authorization Code (FAC),
Client Matter Code (CMC), or additional digits (such as a user extension, a meeting access code, or a voicemail
password). These numbers usually require you to input pause characters in the digit string.
Related Topics
Pause in Speed Dial
Place a Call with a Speed-Dial Button
Before You Begin
Before you can use speed-dial buttons on your phone, you must set up Speed Dial in the User Options Web
pages.
Procedure
To place a call, press a speed-dial button on the left side of your phone.
Use Speed-Dial Code On-Hook
Before You Begin
Before you can use speed-dial codes on your phone, you must set up the codes on your User Options web
page.
Procedure
Enter the speed-dial code and press Speed Dial.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
108
Calling Features
Speed Dial
To Next Page
Loading...
Need help?
General