DescriptionSoftkey
Selects the highlighted manager from the list of managers and opens the Manager
Settings window.
Select
Answer an incoming call for the corresponding manager.Answer
Exits the Assistant Service.Exit
Immediately diverts incoming, connected or on-hold call to the corresponding
manager (the default) or to another preset directory number.
Redirect
Sends an incoming, connected, or on-hold call to that manager's voice mailbox.TransVm
Enables the assistant to speak to a manager on an intercom line.InterCom
Takes the assistant offline. If another assistant is configured for the manager, and
if that assistant is online, then that assistant becomes the active assistant for the
manager.
GoOffLine
Opens the Assistant Settings window. The assistant uses this to configure settings.
See Assistant Settings Menu, on page 41.
AsstSett
Related Topics
Log In to IPMA Service on Phone, on page 45
Set Divert Target, on page 42
Assistant Settings Menu, on page 41
Manager Settings Menu, on page 39
Manager Settings Menu on Assistant Phone
The Manager Settings menu is used to manage applicable settings on behalf of each associated manager that
appears in the manager list of the Assistant Manager Status window. The available settings depend on whether
your phone is configured in shared-line mode or in proxy-line mode.
In shared-line mode, only the Do Not Disturb feature can be set by the assistant.
In proxy-line mode, the Manager Settings menu on the assistant phone is similar to the Manager Settings
menu on the manager phone. Note that the assistant cannot specify the active assistant phone for the manager
phone, but Do Not Disturb and Divert Calls can be toggled by the assistant. The assistant is also able to set
the manager divert target for the selected manager. If the divert target is set to be blank, then the divert target
is saved as Assistant.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
44
Applications
Assistant Phones