Cisco Unified 8961 User Manual

Configure KEM Buttons
Before you can set up KEM buttons, contact your system administrator for the following information to access
your User Options web page:
•
URL
•
username and password
After you have this information, you can configure your speed-dial numbers or program buttons to access
phone services. Phone services can include, for example, weather, stock quotes, or corporate calendars and
directories.
Adjust Key Expansion Module Brightness
Procedure
Step 1
Press Applications on the phone.
Step 2
Use the Navigation pad and Select to scroll and select Preferences.
Step 3
Select Brightness.
Step 4
Select Key Expansion Module.
Step 5
Adjust brightness.
•
To increase brightness, press the right arrow on the Navigation pad.
•
To decrease brightness, press the left arrow on the Navigation pad.
Step 6
Press Save to set the brightness, or press Cancel to exit.
Cisco Unified Video Camera
The Cisco Unified IP Phone 9951 and 9971 support the Cisco Unified Video Camera.
The Cisco Unified Video Camera connects to your Cisco Unified IP Phone and allows you to make a
point-to-point video call with another Cisco Unified IP Phone with a Cisco Unified Video Camera attached.
If a phone does not have a Cisco Unified Video Camera attached, it can receive only one-way video.
The Cisco Unified IP Phone 8961 does not support the Cisco Unified Video Camera and does not display
video.
Note
The following figure shows the Cisco Unified IP Phone 9951 and Cisco Unified Video Camera.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
137
Accessories
Configure KEM Buttons

Cisco Unified 8961 Specifications

General

Brand	Cisco
Model	Unified 8961
Category	IP Phone
Language	English