SoftkeyProgrammable
Feature Button
Dedicated Feature
Button
Feature Name
XXSpeed Dial
XSpeed Dial Line Status
XSupport for Hold Button on USB
Headset
X (available only during
a transfer)
XTransfer
For details on softkeys used with Cisco IP Manager Assistant (IPMA), see Manager Phones, on page 38
and Assistant Phones, on page 40.
Note
Survivable Remote Site Telephony Overview
If communication between your phone and the Cisco Unified Communications Server is interrupted, you
receive an alert message on your phone. If you are on an active call, the call remains established, and you
enter a failover situation. This failover is the Survivable Remote Site Telephony (SRST) feature.
While in failover, not all the features of your phone are available. The following table describes typical feature
and feature availability, although not all the features may be supported on your phone . For more information
about feature availability during failover, contact your system administrator.
Table 6: Feature support during failover
NotesSupportedFeature
YesNew Call
YesEnd Call
YesRedial
YesAnswer
YesHold
YesResume
YesConference
The Active Calls softkey does not
display.
NoConference to Active Calls (Join)
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
72
Calling Features
Survivable Remote Site Telephony Overview
To Next Page
Loading...
Need help?
General