Cisco Unified 8961 - Feature Button and Softkey Overview

Sign In to WLAN
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select WLAN Sign in.
Step 3
Press Sign in.
After a successful login, the phone displays the Wi-Fi signal strength in the top right corner of the phone
screen.
Your phone notifies you about any Wi-Fi issues by displaying a visual notification on the phone screen.
See the table below for the different types of Wi-Fi signals that appear on your phone.
DescriptionIcon
No access point detected
Access point detected
Access point signal levels 1–4
Change WLAN Sign-In
Procedure
Step 1
Press Applications .
Step 2
Use the Navigation pad and Select button to scroll and select WLAN Sign in.
Step 3
Press Select and from the keypad, enter a user ID.
Use to delete what is in the User ID field. Use the keypad to enter a user ID.
Step 4
Press the down arrow on the Navigation pad to enter a password.
Step 5
Press Select and from the keypad, enter a password.
Step 6
Press Sign-in.
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
56
Applications
Sign In to WLAN