Procedure
Step 1
Obtain the User Options URL, user ID, and default password from your system administrator.
Step 2
Open a web browser on your computer and enter the URL.
Step 3
If prompted to accept security settings, select Yes or Install Certificate.
Step 4
Enter your user ID in the Username field.
Step 5
Enter your password in the Password field.
Step 6
Select Login.
The Cisco Unified CM User Options home page displays. From this page you can select User Options to
select a device, access User Settings, Directory features, your Personal Address Book, and Fast Dials.
Step 7
To sign out of your User Options web pages, select Logout.
Device Settings
You can make changes to your device settings on your phone from the User Options web pages. You can
make changes to these device settings on your phone:
Select Device from User Options Web Page
Procedure
Step 1
On your User Options web page, select User Options > Device.
The Device Configuration window displays. Toolbar buttons located at the top of the Device Configuration
window are specific to the selected device type.
Step 2
(Optional) If you have multiple devices assigned to you, select the appropriate device (phone model, Extension
Mobility profile, or Remote Destination profile) from the Name drop-down menu.
Customize Do Not Disturb Options
Procedure
Step 1
On your User Options web page, select User Options > Device.
Step 2
Set the following options:
•
Do Not Disturb: Check the check box to enable or disable DND.
•
DND Option: Select either None or Ringer Off (to turn off only the ringer).
•
DND Incoming Call Alert (applies to either DND option set): Set the alert to Beep Only, Flash Only,
Disable, or select None (to use the Alert setting set up by your system administrator).
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 9.0 (SIP)
116
User Options Web Pages
Device Settings
To Next Page
Loading...
Need help?
General