ClearCom FreeSpeak II - Setting Sidetone Level; Setting Headset Limiter

User Guide | FreeSpeak II™ Base station version
Page 105
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.3.2 Setting the sidetone level
Use this setting to set the level of the sidetone. The sidetone will track the master
volume level. To set sidetone level:
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Settings > Headset
Options > Sidetone > Sidetone Level.
3) Use either rotary control to select the sidetone level between -70dB and
0dB.
4) To confirm the selection and exit the menu screen, press the Menu
Select key.
8.3.3 Setting the headset limiter
Use this setting to limit the incoming headset audio level to prevent excessive
sound levels.
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Settings > Headset
Options > Limiter.
3) Use either rotary key to select the sidetone level between -32dB and
16dB. The default is 0dB.
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.4 Configuring the beltpack microphone
You can configure the following microphone settings:
 Microphone type
 Microphone echo cancellation
The menus that appear depend on the menu access level. See 8.8.2 Setting full
menu access.