ClearCom FreeSpeak II - Setting Low Battery Alarm Threshold; Setting Out of Range Alarm; Setting Call Alert

User Guide | FreeSpeak II™ Base station version
Page 109
 Off
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.6.2 Setting the low battery alarm threshold
Use this setting to determine the battery power level that triggers the low battery
alarm.
1) To enter the beltpack menu, press and hold the Menu key (D).
2) Use the rotary and Menu Select keys to select Settings > Alarm
Options > Low Battery Threshold.
3) Use either rotary control to select a value between 0 and 100%.
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.6.3 Setting the out of range alarm
Use this setting to determine what kind of alarm the beltpack issues when it
moves out or range of an antenna. You can set the following alarms:
 Audio on
 Off
1) To enter the beltpack menu, press and hold the Menu key.
2) Use the rotary and Menu Select keys to select Settings > Alarm
Options > Out of Range Alarm.
3) Use either rotary control to select between:
 Audio only
 Off
4) To confirm the selection and exit the menu screen, press the Menu
Select key (D).
8.6.4 Setting the call alert
Use this setting to determine what kind of alert the beltpack issues when it
receives an incoming call. You can set the following alerts:
 Audio warning