User Guide | FreeSpeak II™ Base station version
Note: If necessary, using two RF bands (1.9 GHz and 2.4 GHz) will increase the amount
of beltpacks that can be used in one area or cell.
2.1.3 Using multiple Base stations in the same radio frequency
(RF) space
The FreeSpeak system is designed so multiple Base stations can work in the same
radio space. To ensure smooth coexistence of Base stations, you will need to
make sure that the System Identifier of each Base station does not clash with
another nearby. All FreeSpeak Base stations are shipped with a System Identifier,
located in the Systems tab of the FreeSpeak configuration editor. To ensure that
the belt packs are associated securely with a particular Base station, you might
need to change the System Identifier for that station. See 10.9.2 Change Base
station System identifier.
2.1.4 FSII 1.9 GHz/FSII 2.4 GHz
FreeSpeak II 2.4 GHz frequency range devices
(ISM, Industrial, Scientific and Medical frequency)
Power status LED = Blue
Data synch status LED = Amber
FSII-TCVR-24
FSII-BP-24
To Next Page
Loading...
