User Guide | FreeSpeak II™ Base station version
6.22.1 Kill beltpack microphones
Selecting this function will kill the microphones on all the wireless beltpacks
connected to the Base station. Beltpack users will have to press a talk key again
to re-enable the beltpack microphone.
6.22.2 Kill partyline microphones
Selecting this function will kill the microphones on all the partyline stations
connected to the Base station. As this operates by interrupting the power to the
partyline stations it does not kill microphones on partyline stations that are
externally powered, that is not powered from the FS II Base station.
6.22.3 Kill all microphones
Selecting this function will kill the microphones on all beltpacks attached to the FS
II Base station.
Beltpack users must press a talk button in order to re-enable microphones
afterwards.
6.23 Battery indicator
Selecting the “BATT” function will display the battery life monitor screen.
Figure 6-58 Battery level menu
The line below the title line is battery monitor that shows the battery levels of all
beltpacks that are connected to the Base station. When the battery level of a
beltpack drops to the alarm level and the battery low alarm is triggered the
display for that beltpack will be displayed highlighted.
To Next Page
Loading...
