ClearCom FreeSpeak II - Specifications; FreeSpeak II Base Station Specifications

Page 178
13 Specifications
13.1 FreeSpeak II Base station
Base station-to-Beltpack
Frequency Response 100 Hz – 7.1 kHz
Number of FS-BP Beltpacks
per Base station 20
Number of FS-TA Transceiver/
Antennas Supported by Base station: 10
Number of transceiver/
antenna Ports 2
Programming port LAN
Relay port DB9; normally open and normally close
wiring
Party-Line Intercom A and
Intercom B (each) XLR-3F with XLR-3M loop through,
on/off termination switch.
4-Wire/Matrix Connection 4 RJ-45 for 4-wire (Intercom 3 – 6)
Program Input XLR-3F, transformer isolated, line-level
input
Stage Announce Output XLR-3M, transformer isolated, line-level
output
Front-Panel Headset 4-pin male connector with 2-channel,
mono-summed capability and individual
talks and listens
Front Panel Display 254 x 32 dot-graphic VFD
Front Panel Indicators 2 Talk LED’s for front-panel headset;
CH A and B party-line enable LED’s;
Program Input enable LED; 10 individual
beltpack LEDs
Base station Programming/Editing Push-to-enter rotary encoder