User Guide | FreeSpeak II™ Base station version
Figure 3-6 Using an antenna and beltpack in standalone mode
Registering beltpacks.
7.3.2 Charging the beltpack
The beltpack batteries are located inside the beltpack battery compartment. The
beltpack can use a Clear-Com rechargeable Li-Ion battery or AA batteries. A
dedicated battery charger can charge up to five batteries simultaneously.
Note: You can also recharge batteries by using the supplied USB charger. Do not use
any other USB charger.
To recharge the beltpack battery:
1) Insert either the beltpack containing the battery, or the battery itself into
one of the recharging bays on the battery charger. A red LED indicates
that the battery is recharging.
To Next Page
Loading...
