User Guide | FreeSpeak II™ Base station version
Figure 10-4 Map Upload Progress
Retrieval of the configuration should take about 15 seconds. If the
program fails to connect to the FS II Base station, the following dialog
appears:
Figure 10-5 Configuration Editor Ethernet Timeout
If this occurs, check the Ethernet connections at the PC and the Base
station. Ensure that the IP address is correct and that it is valid for use on
the local network.
10.1.4 Loading a configuration file to the Base station from the
Configuration Editor
You can load an edited configuration file from the Configuration Editor to the Base
station using:
A serial link
Ethernet
To Next Page
Loading...
