User Guide | FreeSpeak II™ Base station version
3) Now take the beltpack you wish to register. On the beltpack to be
registered, hold the menu key for two seconds to enter MENU options.
Scroll to SYSTEM CONNECT using the rotary controllers and select it using
key D. In menu mode the D key on the beltpack operates as SELECT and
the C key exits the menu level and cancels the selection.
Note: On a new system there will be no previous connections at this
point. However, if the beltpack has been connected previously, a
confirmation screen will appear. Select Yes to connect to a new
system or No to remain connected to the current system.
4) Available systems will be visible on the beltpack menu screen.
To Next Page
Loading...
