User Guide | FreeSpeak II™ Base station version
9) The amber LED flashes continuously to show that the antenna is open for
pairing with a beltpack in standalone mode.
10) From the beltpack, press the menu key (3 second press) and navigate to
System Connect using the right hand rotary controller on the beltpack.
11) Press button D to see local systems available for connection.
Note: In menu mode the D key on the beltpack operates as SELECT and
the C key exits the menu level and cancels the selection.
12) Scroll through available systems using the right hand rotary controller.
13) When you have found the antenna to pair to (it will be showing a ‘P’ to
indicate that it is ready to be paired to the beltpack) press button D to
select the antenna and connect the beltpack to it.
14) When the beltpack is successfully connected to the antenna, navigate to
Site Survey in the beltpack menu and monitor the range and
performance of the antenna. For more information on Site Survey
functionality see 3.4.1 Doing a site survey with a beltpack.
To Next Page
Loading...
