User Guide | FreeSpeak II™ Base station version
4.2.2 Connecting to an RTS™ wired beltpack ......................................... 39
4.2.3 Front-panel adjustments for partyline connections ......................... 39
4.2.4 Troubleshooting partyline connections .......................................... 40
4.3 Wireless partyline .................................................................. 41
4.4 Connecting to 4-Wire and digital matrix intercom ....................... 42
4.4.2 Connecting to Clear-Com matrix plus ........................................... 44
4.4.3 Connecting to Clear-Com Eclipse digital matrix .............................. 44
4.4.4 Connecting with other digital matrix intercom systems ................... 45
4.4.5 Connecting with other 4-wire devices ........................................... 45
4.5 Connecting to a program audio source ...................................... 46
4.6 IFB configuration ................................................................... 46
4.7 Connecting to the stage announce output ................................. 47
4.8 Connecting to a PC ................................................................ 48
4.8.1 Connecting using the serial port .................................................. 48
4.8.2 Connecting using the LAN port .................................................... 50
4.9 Connecting to transceiver/antennas ......................................... 50
4.9.1 Connecting one transceiver/antenna directly to a transceiver
port ........................................................................................ 50
4.9.2 Connecting transceiver/antennas with a splitter (PD2203) ............... 51
4.9.3 Powering an antenna or antenna splitter ....................................... 52
5 Operating the Base station .................................................. 53
5.1 Introduction .......................................................................... 53
5.2 Understanding Front-Panel Operation ....................................... 54
5.2.1 Call Channel A .......................................................................... 54
5.2.2 Call Channel B .......................................................................... 54
6 Programming a system from the Base station ..................... 58
6.1 Introduction .......................................................................... 59
6.2 Using the Base station’s programming menus ............................ 60
6.3 Saving changes ..................................................................... 60
6.4 Changing beltpack labels ........................................................ 60
6.4.1 To change a beltpack label ......................................................... 60
6.5 Setting and changing port labels .............................................. 62
To Next Page
Loading...
