cobas h 232 User Manual

Meter Setup
113
The additional status information is displayed after powering on the meter or after logging off as
an operator. This includes information about current lockouts, the number of results not trans-
ferred (to the DMS) and the time since the last data transfer.
In environments with multiple operators, it can be useful to display a test only if the operator
carrying out the test is present. By requiring operators to login again before displaying results,
you ensure that only authorised persons view the results.
3 Touch Start Info.
4 Touch the button to select the state of the
status display. Your selection is now high-
lighted.
5 Touch to save this setting, or touch
to exit this menu without saving any
changes.
6 Touch Result Login.
7 Touch the button to select the state of the
option. Your selection is now highlighted.
8 Touch to save this setting, or touch
to exit this menu without saving any
changes.
Setup - Optional Screens
Result Login
Result Confi rmation
Start Info
04/19/2016
Disable
Enable
Start Info Screen
04/19/2016
Setup - Optional Screens
Result Login
Result Confi rmation
Start Info
04/19/2016
Disable
Enable
Result Login Screen
04/19/2016

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)