cobas h 232 User Manual

Control Testing and Quality Control
150
The result of this quality control test is dis-
played and is automatically saved to memory.
The target value and the range in which the
results for this control material should be
located is displayed below the current result.
If a quality control test fails, an up arrow (too
high) or down arrow (too low) is displayed.
There are three options for displaying a QC
test result:
• Pass/Fail
• Value
• Value & Pass/Fail
For details refer to “QC result format” on
page 105 and “Settings summary” on
page 47.
QC Test - Result
329
04/19/2016 10:17
pg/mL
(350 / 300-400 pg/mL)
Level:
proBNP PB1234
PBC014
JONES, TOM
Par:
Op:
Code:
QC: 1
Pass:
04/19/2016
QC Test - Result
04/19/2016 10:17
(350 / 300-400 pg/mL)
Level:
proBNP PB1234
PBC014
JONES, TOM
Par:
Op:
Code:
QC: 1
04/19/2016
Fail:
490
pg/mL

cobas h 232 Specifications

General

Device Type	Point-of-care analyzer
Sample Type	Whole blood, plasma
Measured Parameters	Troponin T, Myoglobin, D-Dimer, NT-proBNP
Connectivity	USB
Intended Use	cardiac markers
Data Management	LIS connectivity
Throughput	Single test
Sample Volume	150 µL
Operating Temperature	15-30 °C
Operating Humidity	10-85% (non-condensing)
Display	Color touchscreen
Measurement Principle	Electrochemiluminescence immunoassay (ECLIA)