ComAp InteliDrive DCU Industrial User Manual

InteliDrive DCU Industrial 3.4.0 Global Guide
25
1. Internet connection via AirGate – using InteliBridge-NT (IB-NT). No fixed and public IP address is needed.
2. Internet connection without AirGate – using InteliBridge-NT (IB-NT) or IG-IB module. The module has to
have fixed and public IP address.
Note: The WebSupervisor ComAp tool is supported from ID-DCU Industrial version 3.1, specifically from ID-
DCU-INDUSTRIAL-W-3.1.mhx firmware.
2.3 List of supported modules
Product Description Order code
Inteli AIN8
8 Analog inputs (R,
I, V) and 1
pulse/frequency
input
I-AIN8
Inteli AIN8TC
8 Thermocouple
Analog inputs
I-AIN8TC
Inteli IO8/8
8 Binary inputs, 8
Binary outputs and
2 Analog outputs
packed in a small
unit (HW
switchable to
IO16/0). HW
switchableto IO16/0
- 16 Binary inputs
I-IO8/8
IS-BIN 16/8
16 configurable
galvanically
separated inputs, 8
configurable
IS-BIN16/8

ComAp InteliDrive DCU Industrial Specifications

General

Brand	ComAp
Model	InteliDrive DCU Industrial
Category	Controller
Language	English