InteliDrive DCU Industrial 3.4.0 Global Guide
6
1 Document information
1.1 Clarification of Notation 6
1.2 About this guide 6
1.3 Legal notice 7
1.4 Document history 7
1.5 Backward compatibility 8
1.1 Clarification of Notation
Note: This type of paragraph calls the reader’s attention to a notice or related theme.
IMPORTANT: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or improper function of the equipment if not performed correctly and may not be clear at
first sight.
Example: This type of paragraph contains information that is used to illustrate how a specific function
works.
1.2 About this guide
InteliDrive DCU Industrial is a specialized engine controller for Industrial applications. It controls, monitors and
protects the engine in single or variable speed operational modes. The controller can communicate with Engine
Management System via the CAN serial line using standard J1939 or another (KWP2000) communication
protocol.
InteliDrive controllers are equipped with a monochromatic graphic display with icons, symbols and bar-graphs
for intuitive operation, which together with high functionality sets new standards in engine controls.
Engine functions
Engine sequencing and control (start/stop, warm-up and cool-down, pre-lubrication etc.)
Engine monitoring and protections (2 or more level analog inputs protection, adjustable delays)
Speed measurement from magnetic pick-up or from ECU
Running hours meter, number of starts counter
Configurable 14 Binary inputs and Outputs and 8 Analog inputs
Setpoints are adjustable via InteliDrive panel or via PC software
3 level password protection
On screen Alarm and ECU Alarm indication
Event and time driven engine history for back tracing
Two or more languages selectable in controller
Communication
RS232 / Modbus RTU
Analog or GSM modem
To Next Page
Loading...
Need help?
General
