InteliDrive DCU Industrial 3.4.0 Global Guide
32
Note: ID-DCU Industrial box is fixed using four screw clips.
Note: Maximal torque to tight main screw is 0.25 Nm.
4.1.5 ID-COM terminals
Communication interface ID-COM is mounted directly to ID-DCU Industrial box.
The new standard ID-COM will only be with the RS485 interface.
Note: Maximal torque to tight main screw is 0.25 Nm.
CAN1 Extension modules: EMS, IS-AIN8(TC), IS-BIN16/8, IGS-PTM, IGL-RA15
CAN2 Intercontroller: I-LB+, IG-IB, IB-NT, others ID-DCU Industrial
To Next Page
Loading...
