InteliDrive DCU Industrial 3.4.0 Global Guide
338
8.2.9 InternetBridge-NT
Image 8.15 Dimensions of IB-NT
For more information about IB-NT, please see InternetBridge-NT Global Guide
Note: Connect ID DCU HW 2.0 and newer + ID-COM with RS485 connected to IB-NT over RS485 works fine.
But: only one couple of balancing resistors has to be added on the whole RS485 line, and setpoint in ID-DCU
CommSet called RS485 TermCSpd (page 114) has to be set to 57600 bps.
To Next Page
Loading...
