InteliDrive DCU Industrial 3.4.0 Global Guide
2
Table of contents
1 Document information 6
1.1 Clarification of Notation 6
1.2 About this guide 6
1.3 Legal notice 7
1.4 Document history 7
1.5 Backward compatibility 8
2 System overview 9
2.1 Operator Interface 9
2.1.1 Controller screens 10
2.1.2 Display menu 16
2.1.3 Functions available from ID-DCU Industrial front panel keys 17
2.1.4 How to change controller language? 18
2.1.5 How to change the display backlight intensity? 18
2.1.6 How to change the display contrast? 18
2.1.7 How to check the serial number and software revision? 18
2.1.8 How to find active alarms? 18
2.1.9 How to select engine mode? 18
2.1.10 How to view and edit setpoints? 19
2.1.11 How to view measured data? 19
2.1.12 How to view the History menu? 19
2.1.13 Main screen indication 19
2.2 Controller configuration and monitoring 20
2.2.1 AirGate connection to the PC 20
2.2.2 Configuration steps 21
2.2.3 Direct conection to the PC 21
2.2.4 DriveConfig 22
2.2.5 Modbus protocol 23
2.2.6 Password protection 24
2.2.7 WebSupervisor 24
2.3 List of supported modules 25
3 Application overview 27
3.1 ID-DCU Industrial 27
3.1.1 Default archives 27
3.1.2 Operational modes 27
3.1.3 Universal states 28
To Next Page
Loading...
Need help?
General
